• Running on eSATA to SATA HDD and fulfill USB Input function simultaneously
• 1.5Gpbs or 3Gpbs link rate with auto-negotiation
• Enhanced 2nd Generation PICO 1.9 SteelVine Storage Processor. PICO is a simple RISC based embedded Central Processing Unit that reduced Instruction set from Computer system that be improve the performance of the whole System
• Virtualized multiple storage devices into one or many units, Mutli-Drive spanning, Drive partition or act as a JBOD Port Multiplier
• Host side NCQ support over SATA, adding with FIFO per devices for reads and writes
• Hot Plug support
• Compliant with USB 2.0 Specifications
• Full and High-Speed rates (12~480Mb/s) USB operation
• Support for Drive Locking using ATA proprietary commands
• OTG backup program with Backup Button
• LED indicate with Storage Device
• SteelVine Manager Software Tools enable you to configured setup with eSATA or USB host connections from your PC to the Communicator D2 Combo

• High-speed USB 2.0 interface; backward compatible with USB 1.1
• Supports multiple flash card interfaces and the latest flash card specifications
• SD/MMC, MS/MSPro, SM/xD and MicroSD/MMCMicro. (SD/MMC bus interface for dedicated MicroSD™/MMCMicro™/T-Flash™ slot)
• Supports SIM port to enable Subscriber Identity Module Card phone book/SMS managements

• Compliant with Universal Serial Bus Specification Revision 2.0
• Certified by USB Implementers forum and granted the USB 2.0 High-Speed Logo
• Supports Over-current detection and individual or ganged power control
• Provide wide insertion space for large USB device

Requirments:
PC Systems

• Intel Pentium-III 500MHz equivalent or faster
• CD-ROM Drive
• 64MB Memory (Minimum)
• 250MB of free disk space
• Super VGA (800x600) or higher resolution display with at least 256 colors
• Mouse or compatible pointing device
• Windows 2000/XP/2003 Server or Windows Vista with the latest Service Packs
• SATA connection: Communicator D2 Combo and associated software drivers, or any other third-party SATA host controller with Port Multiplier support
• USB connection: USB 1.0 or 2.0 direct host connection or USB hub

Macintosh Systems

• PowerMac G5, MacBook Pro or Mac Pro
• CD-ROM Drive
• Mouse or compatible pointing device
• MacOS X,10.4.8 (or later)
• SATA connection: Communicator D2 Combo and associated software drivers, or any other third-party SATA host controller with Port Multiplier support
• USB connection: USB 1.0 or 2.0 direct host connection or USB hub

Package Contents:

• Communicator D2 Combo Docking Station
• Power Adapter 12V / 5A with Power Cable
• SATA Cable: eSATA to eSATA Cable
• USB Cable
• User Manual
• CD Software Tools